192.168.l.l Login : 192.168.1.1 Admin Login Password

Internet and intranet is the lifeline of today’s network based offices and home. Computers and smart devices are connected with each other and with the World Wide Web using a network. The IP address is an important aspect of networking and it is like a unique name or identity of a device which forms a part of the network. Routers are commonly used to connect several devices within a network or to the internet. These routers also have their own unique IP address, which is mostly 192.168.1.1.

Without networking, it becomes very difficult to connect and share data between different devices even if they are located next to each other. Hence it is important to have basic knowledge about networking and router settings as well.  Every device which is connected to the internet has its IP address. This IP address is of two type, Public and Private. 192.168.1.1 is a private type of IP address and it is also used in some routers too. It is also a default IP address for some broadband home connection

Steps For Login Into The Router Using 192.168.1.1:

192.168.1.1 Admin Login

192.168.1.1 is the default IP address which is used by many routers. This is most famous for D-Link and Netgear. Only one computer in a network can be able to use 192.168.1.1 as an IP address. The reason for this is to prevent address conflicts. Other routers in the network would have different default gateways.

  • First, you must launch a browser window and then type the url https://192.168.1.1 in your address bar of the browser
  • Above link will help you with the login into your router console and do configurations.
  • Then a prompt will ask you to enter your username and password.
  • if you have changed your default username and password then enter it. If you don’t have this information then you have to search for the router username and password list.

192 168 1 1 router login

  • Then after you enter correct credentials, you will be able to access your router console.
  • You would be able to make changes in the router settings after you have logged in.
  • It is possible that any machine located in the network can utilize this IP address as it is a private IPv4 address
  • Do not register more than one device with this IP address, otherwise, it would cause address conflicts and the network might have issues.

Common issues occurring in network configuration of ip address 192.168.1.1:

Unable To Access IP Address:

Unable To Access IP Address

If you are not able to access the given IP address then make sure that all numbered are entered correctly. Most people use O instead of zero(0). Try to avoid such type of typing mistakes. If it doesn’t load than also then might be your router using different IP address like 192.168.1.1. If you want to find your default IP gateway then visit our list of default IP address. You can also find the article on how to find the default IP address.

Changing of Router Password:

Reset Router Passwords

In order to keep your network secure, you need to keep on changing your password. Default username and password are known to everyone on the internet and if you do not change it, then your network and connected devices can be hacked at any point in time.

Step 1: First you must log in to your control panel using the above mentioned steps.
Step 2: In the router, console go to your admin panel
Step 3: You will find an option for changing the password over there
Step 4: Always use a mix of letters, numbers, and cases for the purpose of better security
Step 5: Check the list for default credentials and cross verify with yours so that it is not the same

Finding IP Address

There are various ways to find our IP address. If the computer is on a private network and then connecting to the internet then such device would have both private and public IP address.

For finding our public IP address just type ‘my IP’ into google.com and it will return your IP address within a second.

My IP Address

For finding your private IP address opens your command prompt and enters ipconfig it will give your private IP address.

ipconfig

Any computer of any brand can be configured to use this IP address on a local network.
These are some of the common procedures and settings that user can carry out using the IP address 192.168.1.1 on their router. Doing settings properly is important and if you do not have proper networking knowledge then you should not do advanced settings as it may lead to irreversible changes that might need you to reset your router settings again to factory defaults.

192.168.l.l Login : 192.168.1.1 Admin Login Password
4 (80%) 8 votes

How To Change Router Password In Netgear – Netgear Router Login

Netgear is a popular multi-national company that provides hardware and networking equipment of high quality. Many people choose to buy products from this brand and apart from D-link, iball and other popular brands; this is also preferred in the networking industry. If you are having a router which you have recently purchased then you need to change the default admin password of the router and also do configuration settings. This is important for security purposes and also to make optimum and personalized use of the router. If you are not good at networking and do not know how to manage your router, then we will provide you with a step by step guide to set passwords and make settings to your Netgear router.

How To Change Netgear Router Password?

Setup Netgear router

There are several methods to change the password of the router of the Netgear Company. Three most popular ones are mentioned here.

Method 1: If You Want To Change The Netgear Router wifi Password or Network Name i.e. SSID:

  • Step1: First you must launch a browser and then enter the URL as https://www.routerlogin.net in the address bar section.
  • Step2: You will see a screen where you will be prompted to enter the username and password.
  • Step3: If you have not set the password till now then you must use the default credentials which are admin and password. Then click OK.
  • Step4: You will see the home page that displays the BASIC tab. Select wireless on this page.
  • Step5: You would be asked to enter the username in the SSID or name field and then enter a new password in the Password or Network Key field.
  • Step6: Click on Apply and your settings will be saved and now you can use your new password for login purposes.

Netgear Router SSID Password

Note: If after changing the password the device disconnects from the wifi then you must check the available wireless networks once again and enter the new password to log in.

Also Read: 192.168.1.1 Admin Login

Method 2: To Change The Netgear Router wifi Password or Username i.e. SSID Using the Smart Wizard Method:

Step1: Open a browser window and enter the URL https://www.routerlogin.net into the address bar.

Step2: You will be prompted to enter the username and password. If you have not changed the default credentials then use admin as username and password as the password.

change Netgear Router wifi Password with Smart Wizard Method

Step3: After you are logged in you will see the option of Wireless Settings under Setup.

Step4: Change the name and/or password that you want to change. Click on Apply and your changes would be saved.

Method 3: How to Change The Admin Password of The Netgear Router?

If you buy a Netgear router then it would come with default settings of the router. You can access the configuration section of the router using the web address routerlogin.com and then you will get the router’s interface using the username and password as admin and password respectively. You can change the default password in order to improve the network security. Follow these steps to change the password:

  • Step1: Launch the browser using a wireless device or a computer connected to the router.
  • Step2: enter the URL for Netgear router as https://routerlogin.net and then enter the username and password.
  • Step3: After you are logged in then go to Advanced tab and then Administration and Set Password.

change netgear router password

  • Step4: You will have to enter the old password and a new password and then confirm the new password.
  • Step5: If you need assistance in recovering your password in future then select the option of Enable Password Recovery. Click on Apply and your settings will be saved.
    These are some methods to set Netgear router password.
How To Change Router Password In Netgear – Netgear Router Login
Rate this post

How To Login in to TP-Link Router with default username & Password

TP-Link is a Chinese manufacturing company which is responsible for producing computer networking-based products like routers, adapters, mobile phones, range extenders, etc. Routers are for establishing an internet connection.

How To Login to a TP-Link Router:

TP-Link Router Login

To log into the router, internet access is not necessarily required but the device must be connected to the TP-Link router, wired or wireless.

Logging into Your TP-Link Router:

  • First, you need to connect to your router. It can be through a smartphone [Wi-Fi] or a computer [Wi-Fi or Ethernet].
  • Once connected, open your favorite browser and type in ‘192.168.1.1’ in the address bar and hit enter.
  • You will be directed to an admin login page.
  • In the first field, you have to enter your administrator ID and the password in the second field.

TP-Link Router Login

Also Read: 192.168.1.1 IP Login

  • If this is the first time you’re logging in, the default ID and password for a TP-Link router would both be ‘admin’ in lowercase. You can change them after logging in.
  • Once logged in, you will see a dashboard with information such as the firmware version, MAC Address, IP Address, Subnet, SSID, etc. You might be prompted for a software update. Let the update finish and then carry on.

Once You’re On The Dashboard, There Are A Lot Of Things You Could Do:

  • Quick Setup: If this is the first time you’re logging in, this is the place to go. It will help you set up the main settings of your router. You can change the default SSID, password, admin ID and more.
  • QSS: Quick Security Setup.
  • Network: Here you will be able to see your connection type (Static or Dynamic IP), Default Gateway, Maximum Transmission Unit (MTU – largest single packet) size and Primary and Secondary Domain Name Services (DNS). You can also configure some Local Area Network settings from here.
  • Wireless: Probably the most important of them all, this is where you would find the major settings.
  • Changing your SSID: To change the ‘name’ of your Wi-Fi connection, you need to change your Service Set Identifier or SSID. This can be found under the Wireless Settings subtab. You can also change your region and modify channel configurations.
  • Changing your Wi-Fi Password: You can change your Wi-Fi password in the Wireless Security subtab. You can change the version and the encryption type. The industry standard is WPA2-PSK and one should refrain from using WEP. Always keep your network password protected.
  • Wireless MAC Filtering: Sometimes you might want to filter out certain devices and prevent them from connecting to your Wi-Fi. Well good news, that can now be done. There can be two kinds of filters that can be made. Either you can allow only selected devices to connect or you can disallow selected devices. Whatever be the case, you can simply add the MAC addresses of those devices and stay rest assured.

Connect TP Link Router to Computer

Also, follow the given steps as well:

  1. Launch a web browser and type in the IP address of the TP-Link router, the default being 192.168.1.1. It will be given on the bottom label of the product.
  2. Then, type in the default username (usually ‘admin’) and default password (usually ‘admin’) into the login page.
  3. Click on ‘Ok’ to finish the procedure.
How To Login in to TP-Link Router with default username & Password
4.7 (93.33%) 3 votes

How to Block Unwanted Websites From The Router

Routers can be used to Block Unwanted Websites, this is mostly done by parents to put up parental controls restricting their children’s access to certain sites. And also some corporate companies block websites like social websites and malware websites. For unencrypted websites, it’s easy to do so by changing the Security or Access settings. On the other hand, encrypted websites need an external agent. Free services like OpenDNS can help you in filtering sites.

To Block Unwanted Websites From The Router, Follow The Steps Given Below:

wibsite blocked method

  • Check whether the site is encrypted (begins with an https://)
  • If it is not encrypted, then Enter the Router’s IP address in the web browser and go to the Configuration page.
  • Login to your router configuration site.

Different Company Routers Have Different IP Addresses. Some Such Examples Are:

  • D-Link/NETGEAR – https://192.168.0.1
  • ASUS – https://192.168.50.1/
  • AT&T U-verse – https://192.168.1.254
  1. Login to your router configuration site. The default username is usually “admin” and the default password is usually “admin or blank.
  2. After logging in, find the “Security” or “Access Restrictions” subsections to block or filter sites.
  3. Find the “URL Blocking” Section and enter the URLs for the domains you wish to block out. Remember, sites which are encrypted cannot be blocked by this.
  4. Then, save your changes.

If It Is Encrypted, Then How to Block Unwanted Websites:

  1. Sign up for free at https://www.opendns.com/home-internet-security/
  2. Enter the Router’s IP address in the web browser and go to the Configuration page.

opendns to block websites

Different company routers have different IP addresses. Some such examples are –

  • D-Link/NETGEAR – https://192.168.0.1
  • ASUS – https://192.168.50.1/
  • AT&T U-verse – https://192.168.1.254
  1. Log in to your router’s administrator account. Unless the password and username have been changed, the default settings will work.
  2. Find the “WAN” or “Internet Settings” subsection. This may be under the “Basic Setup” section in the configuration menu.
  3. Disable the automatic DNS settings to be able to change them the way you want to.

Also Read: 192.168.11 Login Password

Enter The OpenDNS Server Addresses As Per Given in The Two Fields Provided:

  • 208.67.222.222
  • 208.67.220.220
  • Save the changes you have made.
  • Log in to your OpenDNS account. Click on the “Settings” tab and enter the IP address of your home network.
  • Go to the “Web Content Filtering” Section. Upon choosing the priority, which ranges from Low to High, add in the specific websites you want blocked under “Manage Individual Domains”.

DNS Server

  • There is a limit of 25 websites on this. Ensure that the settings reflect “Always Block” for all of them.
  • For your settings to be effective immediately, get rid of the DNS cache by flushing it. This happens automatically after a while but to ensure immediate effect, you can do it manually.
    After the procedure is finished, remember to test the settings by trying to access blocked sites. If it works, everything is fine. If it doesn’t, repeat the process all over again going through every step carefully in case you missed something. Test again. If it still doesn’t work, contact the helpline.

Different companies have different helpline services for Block Unwanted Websites. They should be mentioned at the back of the router or on the box. Otherwise, you can find their contact information on the Internet.

How to Block Unwanted Websites From The Router
4.3 (86.67%) 3 votes