192.168.l.l IP: 192.168.1.1 Admin Login Password

Internet and intranet is the lifeline of today’s network-based offices and home. Computers and smart devices are connected with each other and with the World Wide Web using a network. The IP address is an important aspect of networking and it is like a unique name or identity of a device which forms a part of the network. Routers are commonly used to connect several devices within a network or to the internet. These routers also have their own unique IP address, which is mostly 192.168.1.1 or routerlogin.net.

Without networking, it becomes very difficult to connect and share data between different devices (you can say smartphones etc) even if they are located next to each other. Hence it is important to have basic knowledge about networking and router settings as well. Every device which is connected to the internet has its dedicated IP address. This IP address is of two type, Public and Private.  192.168.l.l or 192.168.1.1 is a private type of IP address and it is also used in some routers too. It is also a default IP address for some broadband home connection

Steps to Login into the Router using 192.168.1.1

192.168.1.1 Admin Login192.168.1.1 is the default IP address which is used by many wired or wireless routers. This private IP is widely used in D-Link and Netgear routers. Only one computer in a network can be able to use 192.168.1.1 as an IP address. The reason for this is to prevent address conflicts. Other routers in the network would have different default gateways.

  • First, you must launch a browser window and then type the URL https://192.168.1.1 in your address bar of the browser. This IP will help you with the login into your router console and do configurations.

192 168 1 1 router login

  • Then a prompt will ask you to enter your username and password. If you have changed your default username and password then enter it. If you don’t have this information then you have to search for the router username and password list. The default would be admin and password.

router default username passwordThen after you enter correct credentials, you will be able to access your router console. You would be able to make changes in the router settings after you have logged in. It is possible that any machine located in the network can utilize this IP address as it is a private IPv4 address. Do not register more than one device with this IP address, otherwise, it would cause address conflicts and the network might have issues.

Problems while accessing 192.168.1.1 IP

Most of the people are facing different issues while trying to open the default router IP address like 192.168.l.l. Here we have listed some of the common problems with the solutions.

Unable To Access IP Address

If you are not able to access the given IP address then make sure that all numbered are entered correctly. Most people use O instead of zero(0). Try to avoid such type of typing mistakes. If it doesn’t load than also then might be your router using different IP address like 192.168.1.1. If you want to find your default IP gateway then visit our list of default IP address. You can also find the article on how to find the default IP address.

Unable To Access IP Address

Changing of Router Password

In order to keep your network secure, you need to keep on changing your password. Default username and password are known to everyone on the internet and if you do not change it, then your network and connected devices can be hacked at any point in time.

Step 1: First you must log in to your control panel using the above-mentioned steps.

Step 2: In the router, console go to your admin panel

Step 3: You will find an option for changing the password over there

change router password
Step 4: Always use a mix of letters, numbers, and cases for the purpose of better security.

Step 5: Check the list for default credentials and cross verify with yours so that it is not the same.

Finding IP Address

There are various ways to find your IP address. If the computer is on a private network and then connecting to the internet then such device would have both private and public IP address.

For finding our public IP address just type ‘my IP’ into google.com and it will return your IP address within a second.

My IP Address

For finding your private IP address opens your command prompt and type the following command ipconfig/all to view the network settings. Check every line until you see ‘Default Gateway’. This will be your default router address which can be used to configure the device.

find default router ip address

Any computer of any brand can be configured to use this IP address on a local network. These are some of the common procedures and settings that user can carry out using the IP address 192.168.1.1 on their router. Doing settings properly is important and if you do not have proper networking knowledge then you should not do advanced settings as it may lead to irreversible changes that might need you to reset your router settings again to factory defaults.

192.168.l.l IP: 192.168.1.1 Admin Login Password
4.6 (91.49%) 101 votes

How To Login in to TP-Link Router with default username & Password

TP-Link is a Chinese manufacturing company which is responsible for producing computer networking-based products like routers, adapters, mobile phones, range extenders, etc. Routers are for establishing an internet connection.

How To Login to a TP-Link Router:

TP-Link Router Login

To log into the router, internet access is not necessarily required but the device must be connected to the TP-Link router, wired or wireless.

Logging into Your TP-Link Router:

  • First, you need to connect to your router. It can be through a smartphone [Wi-Fi] or a computer [Wi-Fi or Ethernet].
  • Once connected, open your favorite browser and type in ‘192.168.1.1’ in the address bar and hit enter.
  • You will be directed to an admin login page.
  • In the first field, you have to enter your administrator ID and the password in the second field.

TP-Link Router Login

Also Read: 192.168.1.1 IP Login

  • If this is the first time you’re logging in, the default ID and password for a TP-Link router would both be ‘admin’ in lowercase. You can change them after logging in.
  • Once logged in, you will see a dashboard with information such as the firmware version, MAC Address, IP Address, Subnet, SSID, etc. You might be prompted for a software update. Let the update finish and then carry on.

Once You’re On The Dashboard, There Are A Lot Of Things You Could Do:

  • Quick Setup: If this is the first time you’re logging in, this is the place to go. It will help you set up the main settings of your router. You can change the default SSID, password, admin ID and more.
  • QSS: Quick Security Setup.
  • Network: Here you will be able to see your connection type (Static or Dynamic IP), Default Gateway, Maximum Transmission Unit (MTU – largest single packet) size and Primary and Secondary Domain Name Services (DNS). You can also configure some Local Area Network settings from here.
  • Wireless: Probably the most important of them all, this is where you would find the major settings.
  • Changing your SSID: To change the ‘name’ of your Wi-Fi connection, you need to change your Service Set Identifier or SSID. This can be found under the Wireless Settings subtab. You can also change your region and modify channel configurations.
  • Changing your Wi-Fi Password: You can change your Wi-Fi password in the Wireless Security subtab. You can change the version and the encryption type. The industry standard is WPA2-PSK and one should refrain from using WEP. Always keep your network password protected.
  • Wireless MAC Filtering: Sometimes you might want to filter out certain devices and prevent them from connecting to your Wi-Fi. Well good news, that can now be done. There can be two kinds of filters that can be made. Either you can allow only selected devices to connect or you can disallow selected devices. Whatever be the case, you can simply add the MAC addresses of those devices and stay rest assured.

Connect TP Link Router to Computer

Also, follow the given steps as well:

  1. Launch a web browser and type in the IP address of the TP-Link router, the default being 192.168.1.1. It will be given on the bottom label of the product.
  2. Then, type in the default username (usually ‘admin’) and default password (usually ‘admin’) into the login page.
  3. Click on ‘Ok’ to finish the procedure.
How To Login in to TP-Link Router with default username & Password
3.9 (77.14%) 21 votes